AS series spot welder

Description

AS Two-Sided and Single-Sided Spot Welder for Dent Removal

Equipped with cutting-edge paintless dent removal technology, the AS spot welder is designed for use in automotive body repair shops. It features:

• A digital Persian control panel
• A complete tool kit
• Pneumatic welding gun and additional arms for welding various parts of the vehicle
• Suitable for all domestic and foreign vehicles
• The only domestically produced devices certified by ISACO

Features of ElectroTechnoTech AS series spot welder

• Powerful transformer with long lifespan
• Lightweight and easy to move with a wheeled base
• Easy maneuverability of the device’s tools with 2-meter cables and lightweight welding guns
• Very easy to use and a Persian settings panel suitable for beginners
• Equipped with a balancer and balancer base to increase maneuverability and facilitate the movement of cables and guns
• Equipped with analog and digital control panels for precise control of welding current and heat treatment with minimal impact on the vehicle body

Options:

• The possibility of installing a pneumatic motion system including an air jack, solenoid valve, air treatment unit, speed control, all necessary hoses and connections
• Digital weld control timer along with heat sink pack, thyristor, and power switch accessories
• C-shaped arms in four sizes
• X-shaped arm with different lengths
• The possibility of designing and manufacturing custom-shaped holders and electrodes for various parts
• Additional connecting pliers in two models
• Pneumatic suction
• Water chiller unit
• Balancer and balancer base
• Standard components of the devices
• The components and elements of spot welders vary depending on the model. However, the standard

components of this type of spot welder are as follows:

• Transformer
• Metal body and wheeled base
• Analog or digital control panel
• 2-meter cable
• Connecting pliers and single-sided welding gun
• Consumable tool kit

Applications of AS series spot welder:

ElectroTechnoTech spot welders can be used in all automotive body repair shops (dent removal) and all similar industries in terms of functionality and the following description:

• The possibility of two-sided and single-sided spot welding on the go
• Dent removal
• Welding various types of washers, studs, bolts, and nuts on the vehicle body
• Heat treatment and nibbling

Additional Explanations:

• For spot welding the bodies of foreign cars with alloys, the AS-1002 model is recommended, and its welding quality is in accordance with the car manufacturer
• The transformer calculations of these devices (except for the AS-1002 model) are based on air cooling and are fully responsive for dent removal work
• To maintain the efficiency of the devices, the arm, stylus, and electrodes have a circulating water circuit
• Except for the AS-5 model, which is single-phase 220V, all models of this product family can be operated with a 2-phase 380V power supply and a minimum current of 50 amps

 

AS-1002	AS-352	AS-502	AS-501	AS-5	Technical Data
380	380	380	380	220	Supply Voltage (V)
50/60	50/60	50/60	50/60	50/60	Mains frequency (HZ)
100	40	50	50	5	Nominal Power %50ED (KVA)
–	56	75	75	–	Max Power (KVA)
18	7.3	7.7	7.7	5.2	No load Secondary voltage (V)
13	5.3	6.5	6.5	–	Output current with cable & Arm Length (KA)
18	8	8.5	8.5	–	Maximum short circuit current (KA)
100	100	100	100	100	Weld time (cycle)
Digital	Digital	Digital	Analog	Analog	Welding control
–	Pneu.	Pneu/Mechanical	Pneu/Mechanical	–	Mover system
250	60	100	100	32	Fuse (delayed action) (A)
F	F	F	F	F	Insulation class
6	6	6	–	–	Compressed air supply (bar)
L:175	L:175	L:112	L:112	L:57	Overall Dimension (HxWxD) (cm)
W:85	W:75	W:115	W:50	W:45
H:130	H:110	H:80	H:34	H:30
230	180	–	–	–	Weight (kg)